24
INSTALLATION AND USE INSTRUCTIONS
6.1-
USE OF THE DEVICE
THIS FEEDING UNIT CAN BE USED EXCLUSIVELY BY A USER ACTING IN
CONFORMITY WITH THE INSTRUCTIONS CONTAINED IN THIS MANUAL.
BEFORE USING THIS FEEDING UNIT, THE USER MUST CAREFULLY READ AND
UNDERSTAND THIS HANDBOOK IN ALL ITS PART.
BEFORE ENABLING IN MANUAL MODE (RADIO CONTROL, AND PUSH-BUTTON)
THE MOTORS (ACTUATORS) CONNECTED TO THE FEEDING UNIT, THE USER MUST
VERIFY THAT NEAR AND/OR UNDER THE WINDOW THERE ARE NOT ANY PERSONS,
ANIMALS AND THINGS WHOSE SAFETY MAY BE ACCIDENTALLY JEOPARDIZED
(SEE PAR.4.2). MOREOVER, THE USER MUST BE IN A SAFE CONTROL POSITION
ASSURING THE VISUAL CONTROL OF THE WINDOW MOVEMENT.
THE FUNCTION EFFICIENCY AND THE RATED PERFORMANCE OF THE ACTUATOR,
OF THE WINDOW FRAME ON WHICH IT IS INSTALLED AND OF THE ELECTRIC
EQUIPMENT MUST BE VERIFIED STEADILY IN TIME BY PERFORMING, WHEN
N E C E S S A R Y, I N T E R V E N T I O N S O F R O U T I N E A N D S U P P L E M E N TA R Y
MAINTENANCE ASSURING THE OPERATION CONDITIONS IN COMPLIANCE WITH
THE SAFETY REGULATIONS.
ALL ABOVE MENTIONED MAINTENANCE INTERVENTIONS MAY BE PERFORMED
EXCLUSIVELY BY TECHNICAL COMPETENT AND QUALIFIED TECHNICAL
PERSONNEL SATISFYING THE TECHNICAL AND PROFESSIONAL REQUIREMENTS
FORESEEN BY THE LAW IN FORCE IN THE COUNTRY OF INSTALLATION.
SHOULD THE BUILDING IN WHICH THE DEVICE IS INSTALLED BE LEFT
UNATTENDED, IT IS COMPULSORILY TO CLOSE THE AUTOMATED WINDOW
FRAMES IN ORDER TO AVOID ANY EVENTUAL OPERATION ANOMALY CAUSED BY
MAINS FAILURES AND/OR FAILURES OF THE RAIN AND WIND SENSORS (e.g.:
UNFORESEEN METEOROLOGICAL EVENTS).
TF24R/44R
USE AND OPERATION -6
7- DEMOLITION
7.1-
GENERAL INSTRUCTIONS
THE DEMOLITION OF THE FEEDING UNIT MUST OCCUR IN COMPLIANCE WITH THE
LAWS IN FORCE ON ENVIRONMENT PROTECTION.
DIFFERENTIATE THE PARTS MAKING UP THE FEEDING UNIT ACCORDING TO
THEIR DIFFERENT MATERIAL TYPE (PLASTIC, ALUMINIUM, ETC.).
TF24R/44R
8-
SPARE PARTS AND ACCESSORIES UPON REQUEST
8.1-
GENERAL INSTRUCTIONS
THE USE OF "NON-ORIGINAL" SPARE PARTS AND ACCESSORIES WHICH MAY
ENDANGER THE SAFETY AND THE EFFICIENCY OF THE FEEDING UNIT IS
FORBIDDEN. THIS ACTION SHALL INVOLVE THE WARRANTY EXPIRATION.
ORIGINAL SPARE PARTS AND ACCESSORIES HAVE TO BE REQUESTED
EXCLUSIVELY TO YOUR DEALER OR TO THE MANUFACTURER STATING TYPE,
MODEL, SERIAL NUMBER, AND YEAR OF CONSTRUCTION OF THE FEEDING UNIT.
8.2-
ACCESSORIES UPON REQUEST
• No. 1 Wind sensor to detect wind speed;
• No. 1 Rain sensor to detect rain;
• No. 1 433 MHZ Radio control ;
• No.1 Brightness sensor to detect the variations of sun light.
TF24R/44R
Summary of Contents for TF24R
Page 27: ...INSTALLATION AND USE INSTRUCTIONS ...
Page 51: ......
