TOPP T80, Installation And Use Instructions Manual

Page: 30 / 116

3- TECHNICAL DESCRIPTION T80
30 INSTALLATION AND USE INSTRUCTIONS
3.5- ENVIRONMENTAL CONDITIONS
The actuator must be installed in areas with service temperatures ranging from - 5°C
to + 55°C.
IT IS STRICTLY FORBIDDEN TO USE THE ACTUATOR IN POTENTIALLY EXPLOSIVE
ATMOSPHERES.
3.6- FORMULAS FOR CALCULATING THRUST AND TRACTION
Horizontal domes or skylights (Fig. 3 )
F = Opening or closing force
P = Weight of skylight or dome
(Moving part only)
Top-hung windows (A) or bottom-hung windows (B) (Fig. 4 )
F = Opening or closing force
P = Weight of window (moving part only)
C = Opening stroke of window
H = Height of window
3.7- USE
THIS ACTUATOR HAS BEEN EXCLUSIVELY DESIGNED AND MANUFACTURED TO
ELECTRONICALLY OPEN AND CLOSE TOP-HUNG WINDOWS, BOTTOM-HUNG
WINDOWS, PIVOT WINDOWS, AND SKYLIGHTS BY MEANS OF A CONTROL DEVICE.
3.8- LIMITS TO USE
This actuator has been exclusively designed and manufactured for the use described in
paragraph 3.7. Any other kind of use is strictly forbidden as this may compromise the
safety of the installer and the user, as well as the efficiency of the actuator.
Check carefully all environmental conditions (temperature, humidity, wind, snow,
potential chemical agents, etc.) and installation settings (misaligned fitting of brackets
and attachment to the frame, frictions produced by hinges or gaskets, use of self-
balancing window stays, etc.) it is recommended that they not exceed the actuator
performances shown in the technical table. If they do, please find an alternative and
more suitable product for your application.
IT IS STRICTLY FORBIDDEN TO USE THE ACTUATOR FOR IMPROPER PURPOSES,
OTHER THAN THE ONE INDICATED BY THE MANUFACTURER (SEE PARAGRAPH
3.5).
IT IS STRICTLY FORBIDDEN TO USE THE ACTUATOR IN POTENTIALLY EXPLOSIVE
ATMOSPHERES.
C
H
EX
EN
EX
F = 0,54 x P
F = (0,54 x P) x ( )