INSTRUCTIONS FOR INSTALLATION AND USE
EN
T120-T240
Warnings are displayed every five seconds for one second.
Every error is reset during the reset/learning stage or by switching off the equipment.
Battery not installed. Check connector.
Description
Motor prevented by obstacle from opening. Check for obstacles or friction.
Motor prevented by obstacle from closing. Check for obstacles or friction.
Warning list
7
segments
display
S
t
U
V
W
Clock malfunction/not adjust. Set the exact time.
Motor bridge voltage low.
Motor bridge voltage high. La porta continua a funzionare: LED scheda lampeggia.
Code ( digital
program switch )
Q
R
Inside warning. Check for any short cirtuiti peripherals.
Antipanic alarm actived
Internal safety.
X
Z
5.8
SELF RESTORE MANAGEMENT OF ERRORS C-D-E-K-N-P-Q
Errors
C-D-K-N-P-Q
cause a momentary arrest of automation, pending the launch of the procedure for restoring
normal operation.
The procedure involves the automatic execution of a reset command (near) and will be carried out as follows:
Ÿ
Zeroing (near) is successful -> automation continues to work properly;
Ÿ
Zeroing (near) fails order -> automation performs a new attempt to reset (near) that is repeated for the number 5
consecutive times;
Ÿ
The 5 attempts are successful -> automation opens and remains stationary in the open for 5 minutes and then
repeated two more attempts to reset at intervals of 5 minutes;
Ÿ
Additional 2 resets not complete successfully -> automation finally stops in error and you will need the intervention
of a qualified technician.
During the zeroing phase (near) the safety sensors are active, and if:
Ÿ
During the slow closing, the employment of safety sensors of the transit space commands a reopening slow.
Ÿ
During the slow opening in the preceding paragraph, the occupation of the side sensors causes a slow reclosing
Ÿ
During the movement, the contemporary employment of at least one safety sensor side and a sensor safety
compartment passage controls the stop of the door.
53
Summary of Contents for T120
Page 2: ......
Page 27: ...Fig 34 Fig 35 Fig 36 30 30 INSTRUCTIONS FOR INSTALLATION AND USE EN T120 T240 27 ...
Page 59: ......