Topica TP-S1016MDR, Instruction Manual

Page: 10 / 78

Back Panel Connections
8
Alarm Input
ALM-INPUT: Normal open or normal close type alarm signal inputs.
The Alarm Input can be selected as normal open ( N.O. ) or normal close ( N.C. ) input
in the ALARM SETUP MENU . When an alarm occurs, alarm recording will
automatically start.
ALM-OUTPUT: A build-in relay offers 3 nodes which are ALM-COM (common), ALM-NO
(normal open) and ALM-NC (normal close) for external use.
Note: Please check APPENDIX C to see other available alarm input/output functions.
9
LAN Connector : RJ-45 LAN connector for internal 10MBit LAN interface.
10
FAN: Cooling fan, do not cover.
RS485 connector : 2 x RJ-45 connectors for RS-485 remote control, high impedance
Supported are keyboards KS-KBK, KS-KBJ (Optional).
Maximum units in RS-485 network are 32.
11
12
Audio IN: Audio input for recording, and it can be set to “ YES ” or “ NO ” in the RECORD SETUP
MENU .
Audio OUT: Connect to an audio input of a monitor or other device.
RS232 connector : D-Sub 9 pins connector to RS232 ports for remote control.
13
14
VGA MONITOR: Connect to the monitor that has VGA input. (VGA is an optional device).
6