5.11.2 HDD TEMP.
In
HDD TEMP.
, we define:
(1)
BUZZER:
HDD TEMPERATURE buzzer.
ENABLE:
To enable a buzzer when HDD’s temperature is higher than the temperature
set in “SET TEMPERATURE”
DISABLE:
To disable HDD TEMP. buzzer.
(2)
ALARM OUTPUT:
This will transmit a signal to another device. The setting of alarms are
NONE = not
activated, 1 = output signal 1 transmitted, 2 = output signal 2 transmitted, 3 =
output signal 3 transmitted and 4 = output signal 4 transmitted.
To change this,
simply use the Jog Dial on the DVR. Press the Enter key to make your selection..
(3)
ALARM DURATION: PERMANENT
(4) NETWORK
ALARM:
YES:
To enable network alarm.
NO:
To disable network alarm.
(5) SEND
EMAIL:
YES:
Send an email when HDD’s temperature is overheated.
NO:
Do not send an email when HDD’s temperature is overheated.
The email address can be set in the
NETWORK SETUP MENU
.
(6)
STOP RECORD:
YES:
Stop recording when HDD’s temperature is overheated.
NO:
Won’t stop recording even when HDD’s temperature is overheated.
38
Summary of Contents for TP-S1016MDR
Page 1: ...INSTRUCTION MANUAL TP S1016MDR Digital Video Recorder...
Page 63: ...59...
Page 72: ...APPENDIX Remote Control 68...
