1.2 Controlling the digital receiver 3
button switches the digital receiver between standby mode
and active mode.
light blinks every time you press a button on the remote
control.
STANDBY
light lights up while the digital receiver is in standby
mode.
Front display shows the current time in standby mode, and
displays the current service in active mode.
CHANNEL
c
,
a
buttons switch to the previous or next ser-
vice. They are also used to navigate in menus and inter-
active screens.
There is a USB port on the front panel for firmware update and
data transfer. If you have an external hard drive connected to
the digital receiver via the USB port, you can record television
programmes into it.
If you want to watch pay services, pull
the right edge of the front panel to open
the flap, then insert your subscription
card into the front slot.When you in-
sert the subscription card, the side on
which the chip is mounted must face
upward.
Summary of Contents for TBC-2010
Page 6: ......
