42
Recording and Playback
To stop recording, press the
button; then a box like the left fig-
ure appears, which shows the pro-
gramme currently being recorded.
Select recording by using navigation
buttons then press
OK
button to stop
the recording.
While a recording is going on, you can play back one of the
recorded programmes. To view the recorded programme list,
press the
button. See §
7.2
for detailed description about
the recorded programme list.
7.1.2 Timer recording
You can set a programme to be recorded at a specific time.
Even if the digital receiver is in standby mode, it will switch
into active mode and start recording at a specified time. When
the recording comes to the end, the digital receiver will switch
back into standby mode again in one minute. However, if you
press any button on the remote control or on the front panel
even just one time, the digital receiver will not switch into
standby mode.
To add a timer recording, select the
Reservation
menu, then the timer list
will be displayed.
To add a new
timer event, press the
button, and
a box like the left figure appears.
Take the following steps:
1. Set the
Record
option to
On
to make a recording. If this
option is set to
Off
, the digital receiver will turn on at the
