4.7 Options for on-screen display 27
4.7
Options for on-screen display
To set the options for the on-screen
display (OSD), select the
Settings
>
OSD
menu. You should see a screen
like the left figure.
To adjust the transparency level of the OSD, set the
OSD Trans-
parency
option as you desire. Its available range is 0 to 50 per-
cent.
To adjust the display time of the information box, set the
Info
Box Display Time
option as you desire. Its available range is
1 to 30 seconds. If you set this option to
No Info Box
, the in-
formation box will not be displayed when you switch services.
However, pressing the
button will display the information
box. If you set this option to
Never Hide
, the information box
will always be displayed. For the information box, see §
5.2.3
.
In addition, you can raise or lower the position of the infor-
mation box. Set the
Info Box Position
option as you desire. Its
available range is
−
10
to
+3
lines. The higher you set the op-
tion, the lower the information box will be positioned.
If any service’s name is too long to fit the width of the service
name column on the services list screen, you can get it to scroll
by setting the
Text Scroll
option to anything other than
Disable
.
With the choice of
Full Scroll
, it will be fully scrolled until its
end disappears; with the choice of
Part Scroll
, it will be scrolled
only to its end.
