TOPEX MobiLink ISDN2GSM User`s Manual
38
Power supply
Special adapter
Input: Mains 230 V AC 0,3A / 50Hz
Output: jack, 12V DC / 2,08A
Serial interface
Standard
RS-232
Connector
Dedicated RJ-45
Signals
RTS, DSR, RxD, TxD, DTR, CTS,
GND.
Overall
Operating temperature
range
From 5 to 50
°
C
Humidity
10 to 80%, non-condensing
Dimensions (L x W x H)
222 x 115 x 32 mm
Weight
500 g – MobiLink ISDN 2 GSM unit
1 kg – the whole package
7. Operating environment
MobiLink ISDN 2 GSM equipment was designed to work
inside
buildings, so it must be installed only in closed rooms or
enclosures, where the environment conditions should be inside the
limits specified in the “Tech specs” table.
You must NOT allow exposure to rain, dripping water, condensed
humidity, mist, etc
You should avoid dust and prolonged exposure to Sun radiation.
In order to ensure adequate working temperature, the ISDN 2 GSM
interface must not be used too near heat sources or in direct
sunshine.
Also, it must not be overcrowded: you must leave free space around,
below and above the MobiLink interface. This is needed both for
connecting phone / data / antenna cables, and also for ventilation
(natural air cooling to dissipate the heat generated during operation).
Remember, when allowed operating temperature is exceeded this
may not have an immediate, visible effect on the MobiLink unit, but it
can result in unreliable operation, accelerated ageing and hence
diminishing of lifetime.
Summary of Contents for MobiLink ISDN 2 GSM
Page 1: ...USER S MANUAL 2008...
