TOPEX MobiLink ISDN2GSM User`s Manual
24
Blinking 0.25
sec then one
sec off
Interface not synchronized. For
example, if green LED lights 0,25
sec then red LED lights 0,25 sec it
means both interfaces are not
synchronized.
Off
The ISDN interface is synchronized
Lights
continuously
green
The supply voltage is present
Lower
(Power)
Off
There is no supply voltage
3.11. Pinout for the connectors
MobiLink ISDN 2 GSM features four
data connectors at the bottom of its
case. All connectors are of the same
type, female RJ-45, but they have
different functions. Please read the
paragraph carefully and perform the
connections accordingly.
Serial connector
For programming MobiLink ISDN 2 GSM you must use the special
connection cable. The special serial cable is included in the
package of the MobiLink ISDN 2 GSM equipment.
The end towards MobiLink features a RJ11 connector while the end
towards the COM port of the computer features a standard female
DB-9 connector.
In the drawing below you see the pin numbering (from left to right)
of the RJ11 female connector of MobiLink and the corresponding
male RJ11 male connector on the serial programming cable.
7
1
5
8
3
6
9
4
2
Figure 3-9 Serial connector
Summary of Contents for MobiLink ISDN 2 GSM
Page 1: ...USER S MANUAL 2008...
