11
2. Using without AC electricity
The gate opener also can be powered by
2 PCS 12VDC batteries (ONLY included in Y Series)
as the
main power supply with a 24VDC solar panel
to charge it. The capacity of the batteries should be at least
12AH and the power of the solar panel should be at least 30W if there is totally no AC electricity. The gate
opener can run for 10 cycles per day without connecting any other accessories except pushbutton & alarm
lamp if the local average sunshine time is more than 6 hours per day. The power of the solar panel and the
capacity of the batteries should be enlarged if the local average sunshine time is less than 6 hours per day
or using one of the accessories (photocell, external receiver, exit wand and keypad). Please provide us with
more details of the local sunshine condition and accessories needs which we can calculate the configuration
of the solar panel and the batteries. Please connect the batteries & the solar panels & solar controller refer
to the following illustration if you want use the gate opener totally without the AC electricity.
Connecting of the Control Board
1. Motor
The
YELLOW
wire of the motor should be connected into the “1” terminal.
The
RED
wire of the motor should be connected into the “2” terminal.
2. Limit Switches
The
YELLOW
wire of the limit switches should be connected into the “3” terminal.
The
BLACK
wire of the limit switches should be connected into the “4” terminal.
The
RED
wire of the limit switches should be connected into the “5” terminal.
3. Warning Light (Included in some models, refers to the actual package)
The
WHITE
wire of the warning light should be connected into the “6” terminal.
The
RED
wire of the warning light should be connected into the “7” terminal.
4. Photocell Beam System (PBS) (Included in some models, refers to the actual package)
