12
6
. Sign the bolt-hole point on the gate post and gate. Do this by
placing a punch or a sign in the middle of each bolt slot on the
post bracket assemblies and the gate bracket. It allows slight
adjustments to the post bracket. Then remove the post bracket
and gate bracket by taking off the C-clamps.
7.
Drill 14mm diameter holes on the gate post and drill 9mm
diameter holes on the gate at the marked locations.
8.
Attach the post bracket assemblies to the gate posts by using
four expansion bolts.
Summary of Contents for Casar MT8012
