22
Line Control (manual vertical beam alignment)
1
Position the instrument for vertical operation as
instructed on page 12.
2
Press the Power Control pad to turn unit on.
When auto-leveling is complete, the laser beam
will be emitted.
3
Select the Laser Pointing operating mode and
manually rotate the rotating head to align the tri-
angular mark t with the center of the mountain
mark on the rotating head.
4
Move the instrument to align Point A with the
center of the laser.
5
Rotate the head so the beam is pointing toward
point B. Press either one of the Alignment Con-
trol pads to move the beam right or left until it is
precisely aligned to point B.
