14
Continuous scan
(Scan line length can be "Drawn" and held for "Hands-free" operation)
Place target in beam path and hold for a moment. The scanning beam will hesitate, then
start again.
When the target is now removed the beam will continue to scan automatically.
To change the length of the scanning line, move the target left or right after the initial scan
hesitation and the scanning line length will increase until the target is removed.
To cancel the "Drawn" scan simply:
Place the target into the scanning laser beam path again for more than two seconds.
Scanning hesitates
and starts again.
Move the target left or right while
scanning, the scanning line will
lengthen. The "drawn" line will
continue to scan without target
for hands-free scan operation.
