manualshive.com logo in svg

Topcon RL-VH4G, Instruction Manual

Share
Download
Topcon RL-VH4G Instruction Manual Download Page 17

15

Laser Sensor Mode

For long range or outdoor applications, the instrument can be used with an optional elec-
tronic laser sensor. The Topcon LS-70G model is recommended. Press the Mode Control
Pad to select Laser sensor mode. The beam rotates at 300 rpm in this setting.

Laser Pointing Mode (stop)

This mode stops rotation and allows the laser beam to be pointed
by manually rotating the head. Press the mode control pad to select
Laser pointing mode. Beam rotation stops in this mode.

Changing rotation speed 

(only available in Laser pointing mode)

After selecting Laser pointing mode, press either Speed Control
pad to change rotation speed. The right pad increases the rotation
speed. The left pad reduces the rotation speed.

• This mode can also be set with the Remote Controller RC-30.
• Level sensors other than the LS-70G cannot be used.

• The laser beam cannot be moved with the Remote Con-

troller RC-30.

• This mode can be used with the Remote Controller RC-30.

Laser pointing

Summary of Contents for RL-VH4G



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands