11
Control Panel
Head rotates slowly, searching
for Magnetic Scanning Target.
When target is placed in beam
path, laser rapidly scans back
and forth on target.
Level sensor mode
Head rotates at 300 rpm. Use
this setting when using an
optional electronic level sensor
such as the Topcon LS-80B/G.
Head stops rotating and the
beam can be positioned by
manually turning the head.
Select X or Y axis for
manual beam sloping.
ON: Manual leveling mode
OFF: Auto-leveling mode
ON/OFF of Auto-leveling. To turn off the auto-leveling,
press this key twice. To turn on the auto-leveling again,
press this key once.
Flashing: Laser is leveling
On: Auto-leveling is completed (RL-VH4DR/G2
remote controller model has standby mode)
Laser mode is switched
alternately as follows.
With ‘Laser
Pointing Mode’
selected, the
rotation speed of
the head can be
changed.
Alignment
control
Level vial
For vertical
operation
(RL-VH4G2)
The laser output is not stable for several minutes when the power is on or the mode of laser is changed.
After the beam is stabilized (display does not show WAIT), the mode can be changed.
X/Y axis lamp
X/Y axis selection
Leveling lamp
Power switch
Mode switch control
Scan mode
Level sensor mode
Laser pointing mode
Speed control
Auto/manual leveling control
Manual mode lamp
Plumb beam
Low battery alert
Summary of Contents for RL-VH4DR/G2
Page 1: ...INSTRUCTION MANUAL ROTATING LASER RL VH4DR G2 31375 90050 TEP...
Page 2: ...EU...
Page 47: ...45...
