27
How to set remote controller communication channel
The same channel (1 to 9) must be set on the RL-VH4DR/G2 and the RC-40 remote controller.
RL-VH4DR/G2
1
Remove the battery cover by turning the
battery compartment lock to “OPEN”.
2
Turn the channel switch to set a channel by
using a small straight screwdriver (see
illustration for switch location).
3
Replace the battery cover and turn the knob
to “Lock”.
RC-40
1
Open the battery cover and remove the
batteries.
2
Turn the channel switch to the same
channel position set on the RL-VH4DR/G2.
(Initial setting at shipping : Channel 1)
3
Insert batteries and close the battery cover.
RC-40
RL-VH4DR/G2
Channel switch
(1 to 9)
Channel
switch (1 to 9)
Battery Cover
Channel indicator mark
*
* The channel indicator mark indicates the
direction of the selected channel.
In the above figure, channel 1 is selected.
Summary of Contents for RL-VH4DR/G2
Page 1: ...INSTRUCTION MANUAL ROTATING LASER RL VH4DR G2 31375 90050 TEP...
Page 2: ...EU...
Page 47: ...45...
