Topcon MR-2 Operator'S Manual Download Page 79

Page: 79 / 83

WEEE Directive

P/N: 1011907-01

Regul

tor
y

WEEE Directive

Following information is for EU-member states only:
The use of the symbol below indicates that this product may not be treated as household waste. By ensuring

this product is disposed of correctly, to help prevent potential negative consequences for the environment and

human health, which could otherwise be caused by inappropriate waste handling of this product. For more

detailed information about the take-back and recycling of this product, please contact a supplier where you

purchased the product or consult.

Français
[French]

Par la présente

(Topcon)

déclare que l'appareil

(MR-2)

est conforme aux

exigences essentielles et aux autres dispositions pertinentes de la
directive 1999/5/CE.

Italiano
[Italian]

Con la presente

(Topcon)

dichiara che questo

(MR-2)

è conforme ai

requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE.

Latviski
[Latvian]

Ar šo

(Topcon)

deklar, ka

(MR-2)

atbilst Direktvas 1999/5/EK btiskajm

prasbm un citiem ar to saisttajiem noteikumiem.

Lietuvi
[Lithuanian]

Šiuo

(Topcon)

deklaruoja, kad šis

(MR-2)

atitinka esminius reikalavimus

ir kitas 1999/5/EB Direktyvos nuostatas.

Nederlands
[Dutch]

Hierbij verklaart

(Topcon)

dat het toestel

(MR-2)

in overeenstemming is

met de essentiële eisen en de andere relevante bepalingen van richtlijn
1999/5/EG.

Malti [Maltese] Hawnhekk,

(Topcon)

, jiddikjara li dan

(MR-2)

jikkonforma mal-tiijiet

essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva
1999/5/EC.

Magyar
[Hungarian]

Alulírott,

(Topcon)

nyilatkozom, hogy a

(MR-2)

megfelel a vonatkozó

alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Polski [Polish]

Niniejszym,

(Topcon)

, deklaruj, e

(MR-2)

spenia wymagania zasadnicze

oraz stosowne postanowienia zawarte Dyrektywie 1999/5/EC.

Português
[Portugues]

(Topcon)

declara que este

(MR-2)

está conforme com os requisitos

essenciais e outras disposições da Directiva 1999/5/CE.

Slovensko
[Slovenian]

(Topcon)

izjavlja, da je ta

(MR-2)

v skladu z bistvenimi zahtevami in

ostalimi relevantnimi doloili direktive 1999/5/ES.

Slovensy
[Slovak]

(Topcon)

týmto vyhlasuje, že

(MR-2)

spa základné požiadavky a všetky

príslušné ustanovenia Smernice 1999/5/ES.

Suomi
[Finnish]

(Topcon)

vakuuttaa täten että

(MR-2)

tyyppinen laite on direktiivin

1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen.

Svenska
[Swedish]

Härmed intygar

(Topcon)

att denna

(MR-2)

står I överensstämmelse

med de väsentliga egenskapskrav och övriga relevanta bestämmelser
som framgår av direktiv 1999/5/EG.

Summary of Contents for MR-2



















































































Search results

Summary of Contents for MR-2

Reviews:

Brands by name

Popular brands

Topcon MR-2, Operator'S Manual

Search results

Summary of Contents for MR-2

Reviews:

Brands by name

Popular brands