Ethernet Connection
23
P/N: 1011907-01
Configur
ation
Set Up a Static IP Address For the Laptop
When setting up the static IP address of the laptop, the first three numbers of the IP address must match the
receiver’s IP address. For example, if the receiver’s IP address is 10.5.57.200, the computer IP address must be
10.5.57.xxx.
1. Open the
Network and Sharing Center
on your laptop.
2. Change your Local Area Connection TCP/IPv4 settings to match the receiver (Figure 21).
Figure 21: Laptop Internet Protocol Settings
3. Enter the
IP address
for the primary board (see “View Receiver IP Addresses” on page 22).
4. If needed, enter the
Default gateway
address.
5. Click
OK
to apply the changes to your laptop.
