Updating Firmware
51
P/N: 1011907-01
Configur
ation
12. When the upload ends, click
Finish
. A prompt appears indicating that the receiver is updating firmware
(Figure 64).
Figure 64: Firmware Update In Progress
13. Wait approximately ten minutes for the process to finish.
14. Click
OK
to return to the
Select Device
screen.
15. Open the
Terminal
window in TRU.
16. Enter
print,dev/core:on
and click
Send
.
During the update process, the receiver will return the following:
RE00F/par/dev/core={
RE01B 0={mode=normal,state=run},
RE01F 1={mode=update,state=updateX}}
When the update process is finished, the receiver will return the following:
RE00F/par/dev/core={
RE01B 0={mode=normal,state=run},
RE01B 1={mode=normal,state=run}}
17. Repeat steps 2-16 for the auxiliary board.
18. When both boards have been updates, disconnect from the receiver in TRU.
For
RE01F 1={mode=update,state=updateX}}
,
X
will increase from 1 to 7.
