Ethernet Connection
24
P/N: 1011907-01
Configur
ation
View Receiver Password
1. Connect the receiver to TRU using a Serial connection (see “Connect The Receiver to TRU” on page 20).
2. Click
Receiver Settings
Network
. The
Network
screen appears (Figure 22).
Figure 22: Network – TCP Tab
3. Click the
TCP
tab. The password displays in the
Password
field.
Change Password
1. Connect the receiver to TRU using a Serial connection (see “Connect The Receiver to TRU” on page 20).
2. Click
Receiver Settings
Network
. The
Network
screen appears (Figure 22).
3. Click the
TCP
tab, and enter a new password in the
Password
field.
4. Click
OK
, and reset the receiver to enable the new password.
Reset the Receiver
After changing Ethernet settings, reset the receiver. Open the
Terminal
window, enter
set,reset,yes
and click
Send
. The IP addresses become assigned within 30 seconds after reset. The Receiver will reply with a ping,
and become accessible by TCP ports from TRU or PC-CDU. Click
X
to close
Terminal
and go to the TRU main
screen.
Shutdown of the receiver takes approximately 1 to 1.5 minutes. After shutdown, the receiver takes
approximately 1 to 1.5 minutes to restart. After restart, all functions of the receiver are available.
For all receivers, the default password is
topcon
.
