manualshive.com logo in svg

Topcon FC-2600, Operator'S Manual

Share
Download
Topcon FC-2600 Operator'S Manual Download Page 64

Regulatory Information

FC-2600 Operator’s Manual

B-2

• Consult the dealer or an experienced radio/television technician 

for additional suggestions. 

Community of Europe Compliance

The product described in this manual is in compliance with the 
R&TTE and EMC directives from the European Community.

Canadian Emission Labeling 
Requirements

1. Operation is subject to the following two conditions: (1) this 

device may not cause interference, and (2) this device must 
accept any interference, including interference that may cause 
undesired operation of the device.

2. To reduce potential radio interference to other users, the antenna 

type and its gain should be so chosen that the equivalent 
isotropically radiated power (e.i.r.p.) is not more than that 
permitted for successful communication.

3. This Class B digital apparatus meets all requirements of the 

Canadian Interference-Causing Equipment Regulations.

4. The installer of this radio equipment must ensure that the antenna 

is located or pointed such that it does not emit RF field in excess 
of Health Canada limits for the general population; consult Safety 
Code 6, obtainable from Health Canada’s website: 
www.hc-sc.ca/rpb.

Cet appareil numérique de la classe B respecte conform a la norme 
NMB-003 du Canada.

CAUTION

Any changes or modifications to the equipment not 
expressly approved by the party responsible for 
compliance could void your authority to operate 
such equipment.

Summary of Contents for FC-2600













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands