manualshive.com logo in svg

Topcon FC-2600, Operator'S Manual

Share
Download
Topcon FC-2600 Operator'S Manual Download Page 22

Operating the FC-2600

FC-2600 Operator’s Manual

2-2

Front Panel Components

For information on front panel components, see “Front Panel 
Components/Indicators for the FC-2600” on page 1-4 for further 
details.

On/Off Button Operations

The 

On/Off

 button 

 is located at the bottom-left of the front 

panel and functions depending upon the state of the hand-held 
computer when the button is pressed and considering the length of 
time it is pressed. The following is a list of 

On/Off

 button operations:

• Cold Boot

• Suspend

Performing a Cold Boot for the 
FC-2600

To cold boot the FC-2600, press and hold the 

On/Off

 button for about 

10 seconds. This action also terminates running applications and 
stops serial port operations.

Placing the FC-2600 in Suspend Mode

To place the FC-2600 in Suspend mode, press and release the 

On/Off

 

button. Suspend mode allows you to suspend, but not terminate active 
applications. In this mode, the display turns off and the FC-2600 stops 
serial port operations. For battery-powered units, Suspend mode also 
conserves battery power. 

To take the FC-2600 out of Suspend mode, press and release the 

On/

Off

 button again. The display turns on and the device begins running 

any suspended application, but you must restart any serial port 
operations. If you attempt to use the FC-2600 before it has completely 
resumed operations or use it while it is entering Suspend mode, then 
the device will delay three seconds before resuming or suspending.

Summary of Contents for FC-2600













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands