Top Gun 3200 AC/DC TIG, Operation Manual

Page: 8 / 36

TOPGUN 3200 AC/DC TIG USER MANUAL
8
5 . EQUIPMENT
STANDARD PACKAGE
1. WP-18 WATER COOLING TORCH WITH CABLE X8 METERS
2. EARTH CLAMP WITH CABLE X5 METERS
3. 3 MTR QUICK CONNECT GAS HOSE WITH FITTINGS
4. TOPGUN TIG CONSUMABLE KIT
5. MANUAL
6 . TIG / MMA WELDING BEFORE YOU WORK

Specify the location where the device is operated.

Check the voltage, number of phases and frequency of the supply current before switching on
mains devices.

Supply voltage parameters with technical data are given in this chapter and on the type plate
of the device.

Check the connection of the machine's earth wires and the power supply wire.

Ensure that the power can cover the input power demand of this device in the conditions of
its operation.

Fuse size and parameters power cord are provided in the technical data and on the rating
plate.

Remove any flammable materials from the welding area.
 Do not use the device on a stable surface.

Use suitable protective clothing for welding: gloves, apron, work boots, mask or a helmet
with certification.
7
.
WORKING CONDITIONS

Working temperature: -10 ° C to 40 ° C

It is forbidden to work in conditions of high humidity.

Protect against flooding (in case of flooding, immediately turn off the device, power sources,
contact the service center). Avoid working in the environment of flammable, aggressive gases
and dust.

Ensure good dissipation. Avoid interference with the cooling system
.

It is forbidden to cover the ventilation openings of the device.

Do not overload the device. Maintain the correct machine work cycle.

Do not allow the maximum permissible voltage fluctuations from the mains to be exceeded
.
The duty cycle (efficiency) is always given in the technical data table and on the device rating plate
.
It is determined according to the requirements specified in the EN 609741 standard. It is expressed as a