TOPGUN 3200 AC/DC TIG USER MANUAL
33
ERROR CODES
In special cases, the following messages may appear on the display indicating a problem with
the operation of the device. Errors on the display will appear until the defect is removed.
Error 001 Overload
The device is operated in a step exceeding its
rated efficience. The message may also appear
when using an extension cord with
the wrong
diameter. After this message
appears, please
turn off the devices for 5
minutes. if is still displayed after being
turned back on this message should be
contacted with the service.
Error 002 High temperature
The device is equipped with a safety device
before overheating. If found by too high
sensors installed temperature (e.g. failure of
the fan or its lock) the device turns off
,
automatically, and this message will
appear
on the display.
