TOPGUN 3200 AC/DC TIG USER MANUAL
5
In situations not specified in the instructions, always follow the safety rules and regulations in force at
the place where the device is operated.
ATTENTION
The heating test was carried out at ambient temperature and the duty cycle (load factor) at 40C was
determined as a result of the simulation.
The device is intended for conducting professional welding works in industrial conditions by personnel
having valid qualification certificates in accordance with applicable standards.
!
!
WARNING: This Class A equipment is not intended for use in residential areas where electricity is
supplied through the public low voltage network system. There may be potential difficulties in
ensuring electromagnetic compatibility at these locations due to conducted and radiated
disturbances.
The device should be operated in accordance with the Regulation of the Minister of Economy of April
27, 2000. on health and safety at work during welding (Journal of Laws No. 40 item 470).
Keeping this user manual and following the guidelines outlined in it will allow for proper maintenance
of the device in the future. The following warnings are intended to ensure user safety and
environmentally friendly operation. Read the entire manual carefully before
installing and using the device.
After opening the packaging, check that the device has not been damaged during transport. If in doubt,
contact our service department.
The device should only be used by a trained employee or consumer.
When installing the appliance, you should entrust all electrical activities to a qualified
electrician.
