20
NOTE: When shaping it is advisable to achieve
a trapezoidal shape (Fig. 23). A trapezoidal cut
corresponds to the natural growth of plants and
results in optimal hedge growth, as it will expose
more light to the lower end of the hedge.
WARNING! TO STOP THE ENGINE IN AN
EMERGENCY:
Press and hold the ignition switch (10) to “STOP”
position until engine stops.
AFTER USE
1. Switch the product off, allow the engine to cool down and
then remove the spark plug connector.
2. Check, clean and store the product as described below.
CARE AND CLEANING
MAINTENANCE AND CARE
WARNING! Always switch the product off, let the product cool down and disconnect
the spark plug connector before performing inspection, maintenance and cleaning
work!
1. Keep the product clean. Remove debris from it after each use and before storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of the product.
3. Inspect the product before each use for worn and damaged parts. Do not operate it if you find
broken and worn parts.
WARNING! Only perform repairs and maintenance work according to these
instructions! All further works must be performed by a qualified specialist!
GENERAL CLEANING
1. Clean the product with a damp cloth and mild soap. Use a brush for areas that are hard to reach.
2. In particular clean the air vents (21) after every use with a cloth and brush.
3. Remove stubborn dirt with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or
disinfectants to clean this product as they might be harmful to its surfaces.
Fig. 23