9
• Use only perfect cutting blades, e.g. well sharpened, without
cracks, clinks, or deformations, etc.
• Faulty cutting blades should be replaced immediately.
• Never use cutting blades that do not correspond with technical
data stated in this instruction manual.
• Make sure the cutting blade is installed in the right position.
• The machine’s protective device cannot be disassembled or
made dysfunctional in any way.
• Damaged or faulty protective devices should be replaced
immediately.
• If you get disturbed when working with the trimmer, act with
prudence until you adapt your attention to a new situation.
• At regular intervals, check all screws, nuts and fittings are tight
enough.
• Never deposit tools or materials above the machine so that they
could fall down on it.
• Make sure your hands are in the right positions, e.g. make
sure they can not slide and suddenly come in contact with the
cutting blade.
• The material you want to cut should not include nails or other
similar foreign matters.
• Do not overload the machine so it does not slow down and get
overheated.
• Never attempt to remove loose trimmings or wood fragments or
jammed material when the machine is working.
• If you want to remove some defects or clean the machine of
jammed pieces of wood, you must switch it off first.
• Machine adjustment, measuring, cleaning, etc., is allowed only
when the engine is switched off.
• Do not leave an active engine unsupervised.
• After a repair or maintenance of safety or protective devices,
the devices must be reinstalled correctly in the machine.