7
the tool when working.
• Watch for damaged parts. The machine should be carefully
inspected before use. Are any of the parts damaged? In case
of slight damage, consider if the machine is still going to work
safely and without any problems. Make sure it is properly
adjusted and movable parts are properly regulated. Are any
elements interlocked improperly? Is everything well installed:
Are all requirements for trouble-free operation fulfilled?
Damaged protective devices, etc., must be repaired or
replaced by the authorised service centres, unless expressly
stated otherwise in the manual. Faulty switches should also be
replaced in the authorised service centre. If you need to have
your machine repaired, contact your nearest store.
• Make sure that the protective cover of the hedge trimmer works
perfectly, and it is installed in such a way that the blade teeth
are always covered.
• Before adjustments or machine maintenance, switch off the
engine. This is valid mainly if the cutting blade is being replaced.
• Use only approved components. During maintenance and
repairs, use only identical spare parts. Contact your authorised
service centre for this purpose.
Caution!
Using different cutting blades, and other fixtures
and extensions that are expressly not recommended, can
endanger people and property.
WARNING!
The cutting blade can hurt your hands and
fingers and cause life threatening injuries!
Always secure adequate lighting.
The manufacturer cannot be liable if the machine was modified or
used unprofessionally, and damage arose as the result of these
actions.