Troubleshooting
Problem
Possible cause
Rectification
Polishing machine does
not start.
Battery empty.
Charge the battery.
Problem with battery contacts.
Slide the battery into the guide on the
polishing machine handle. The battery
has to click into place audibly.
Shift lock is in locked position.
Press the shift lock 4 to the left to
unlock it.
Polishing machine
is running but the
polishing / sanding
plate is not rotating.
Speed switch is not engaged.
Press the speed switch 2 to position 1
or 2 until it engages fully.
Battery does not
charge.
Battery charger is faulty.
Replace the charger.
WARNING!
Safety measures have to be defined
to protect the operator based on an
estimate of the vibration load during
actual usage conditions (in this case all
the parts of the operating cycle have to
be considered, such as times when the
power tool is turned off, and those where,
the tool is turned on, but is running
without load).
Depending on the way the tool is used
and the operating conditions, the
following safety precautions have to be
taken for the safety of the operator:
- Try to avoid exposure to vibration as much as
possible.
- Only use proper accessories.
- Wear anti-vibration gloves when using the
polishing machine.
- Follow the instructions on maintenance and
care of the polishing machine given in this
manual.
- Avoid using the polishing machine at a
temperature below 10°C and over 40°C.
- Plan your work in such a way so that you do
not have to use vibrating tools over several
days.