Checking the product and scope of
delivery
Before Use
WARNING!
Do not use the polishing machine in
potentially explosive atmospheres.
Use the polishing machine only in
ambient temperatures between 10 -
40°C.
Disconnect the polishing machine
from the power source before
making any settings, mounting or
replacing accessories and carrying out
maintenance.
• Take the polishing machine and accessories
out of the packaging
• Check that the delivery is complete (see
section “Scope of delivery / Description of
parts”).
• Check the polishing machine and accessories
for damages.
• Do not use the polishing machine if it is
damaged or parts are missing. Contact the
manufacturer via the service centre listed on
the warranty card.
WARNING!
Risk of suffocation! There is a risk of
suffocation by ingestion or inhalation of
films. Keep the packaging film out of the
reach of children.
Inserting /removing the battery
(Fig. A)
• Insert the battery 7 into the handle 5
until it locks in place.
• To remove the battery, press the battery
unlocking latch 6 and slide the battery out
of the handle.
• Remove the battery 7 from the handle, as
described in chapter "Inserting / Removing
the battery".
• Insert the battery into the battery holder of
the charger 8 .
• Connect the plug of the charger to a suitable
mains socket. The red charging light
9
is on.
• After about 3 - 5 hours, the red charging
indicator light goes out. The green charging
indicator light lights up when the charging is
completed.
• Disconnect the charger from the mains socket
after charging is complete.
• To remove the battery, press the battery
release button and take it out of the charger.
NOTE!
Ambient temperature for operation:
10 - 40° C.
Charging the battery (Fig. B)
NOTE!
Ambient temperature for charging: 0 - 40° C
Use only the batteries mentioned below:
Model
XW-1204
Rated voltage
12 V
Capacity
2000 mAh
Idling speed 1. Speed 0 - 2600 rpm
2. Speed 0 - 7800 rpm
CAUTION!
When charging and during high loads on
the polishing machine, the battery gets
heated up. Always allow the battery to
cool down to room temperature before
you charge the battery.
The charger becomes warm and may buzz
slightly during charging. This is normal
and does not indicate a fault.
