• Clean the polishing machine with a moist cloth.
Never use strong and / or abrasive cleaning
agents or solvents. Allow all the parts to dry
completely.
• The contact points on the battery and charger
have to be kept clean. Disconnect the charger
by unplugging it from the power supply before
cleaning. Remove the battery before cleaning
the polishing machine.
• Ensure that the ventilation slots are not
blocked and clean the housing of the polishing
machine regularly with a soft cloth.
• Remove the attachment before storage (see
chapter "Mounting the sanding or polishing
attachment").
• Remove the battery before putting the drill
away (see chapter "Inserting / removing the
battery").
• Clean the polishing machine before storage.
• If the polishing machine is not being used,
keep it in a safe, cool, dry and well-ventilated
place, out of the reach of children.
• Store the polishing machine and the battery at
an ambient temperature of 0 - 45° C.
• Store the accessories after use in the storage
case.
• Make it that the polishing attachment rests
completely on the polishing surface.
• Glue plastic parts to avoid colour changes.
• Polish in the shade and never polish hot
varnish.
CAUTION!
When charging and during high loads on
the polishing machine, the battery gets
heated up. Always allow the battery to
cool down to room temperature before
you charge the battery.
Make sure that liquids do not get inside
the polishing machine.
Tips for polishing
Maintenance, cleaning,
storage and transport
WARNING!
Disconnect the mains plug of the
charger and remove the battery of the
polishing machine before carrying out
any adjustment, maintenance, repair
or cleaning. To do this, remove the tool
being used.
Maintenance
Cleaning
Cleaning
The polishing machine requires very little
maintenance.
Only use spare parts / accessories from the
manufacturer or authorised and qualified
workshops.
Repairs should only be carried out by qualified
technicians or by an authorised service centre.
Qualified technicians must have relevant
training and experience, be familiar with the
design and construction requirements of the
product and understand and follow the safety
regulations.
• Remove the attachment before transport (see
chapter "Mounting the sanding or polishing
attachment").
• Remove the battery before transporting the
drill (see chapter "Inserting / removing the
battery").
• Always carry the polishing machine using the
handle provided for this purpose.
• Use the original packaging and secure the
polishing machine in place during transport.
Transport
