3. Vent in gas cap plugged.
4. Water or dirt in fuel system.
5. Dirty air cleaner.
6. Carburetor out of adjustment
2. Clean fuel line fill tank with
clean, fresh gasoline.
3. Clear vent.
4 .Drain fuel tank. Refill with
fresh fuel.
5. Refer to engine manual.
6. See authorized service dealer.
Engine
overheats
1. Engine oil level low.
2. Drity air cleaner.
3. Carburetor not adjusted properly.
1. Fill crankcase with proper oil.
2. Refer to engine manual.
3. See authorized service dealer.
Occasional
skips
(hesitates) at
high speed
1.Spark plug gap too close
2. Carburetor idle mixture adjustment
improperly set.
1. Adjust gap to .030
〞
.
2. See authorized service dealer.
Excessive
Vibration
1. Loose parts or damaged impeller.
。
1. See authorized service dealer.
Unit does not
discharge
1. Chute deflector clogged.
2. Foreign object lodged in impeller.
3. Low engine RPM.
4. Vacuum bag is full.
1. Stop engine immediately and
disconnect spark plug wire.
Clean flail screen and inside of
discharge opening.
2. Stop engine and disconnect
spark plug wire. Remove
lodged object.
3. Always run engine at full
throttle.
4. Empty bag.
Rate
of
discharge
slows
Considerably
or composition
of discharged
material
changes
1
.
Low engine RPM.
2. Chipper blade dull.
1. Always run engine at full
throttle.
2. Replace chipper blade or see
authorized service dealer.
For parts and /or accessories please see local authorized service dealer.
