b.
Before starting the machine, make sure the chipper chute, feed
intake, and cutting chamber are empty and free of al debris.
c.
Thoroughly inspect all material to be shredded and remove any metal,
rocks, bottles, cans, or other foreign objects which could cause
personal injury or damage to the machine.
d.
If the impeller strikes a foreign object or if your machine should start
making an unusual noise or vibration, immediately shut the engine
off. Allow the impeller to come to a complete stop. Disconnect the
spark plug wire, ground it against the engine and perform the
following steps:
.
Inspect for damage
。
.
Repair or replace any damaged parts.
.
Check for any loose parts and tighten to assure continued safe
operation.
e.
Do not allow an accumulation of processed material to build up in the
discharge area. This can prevent proper discharge and result in
kickback of material through the feed opening.
f.
Do not attempt to shred or chip material larger than specified on the
machine or in this manual. Personal injury or machine damage could
result.
g.
Never attempt to unclog either the feed intake or discharge opening
while the engine is running. Shut the engine off, wait until all
moving parts have stopped, disconnect the spark plug wire and
ground it against the engine before clearing debris.
h.
Never operate without vacuum bag and discharge chute properly
attached to the machine. Never empty or change vacuum bag while
the engine is running. Zippered end of vacuum bag must be kept
closed at all times during operation.
y.
Never operate without either the inlet nozzle or optional hose
attachment properly attached to the machine. Never attempt to
attach or change either attachment while the engine is running.
j.
Keep your face and body back and to the side of the chipper chute
while feeding material into the machine to avoid accidental
kickback injuries.
k.
Never operate this machine without good visibility or light. Always
be sure of your footing and keep a firm hold on the handles.
m.
Do not operate this machine on a gravel surface.
n.
Do not operate this machine while under the influence of the alcohol
or drugs.
o.
Muffler and engine become hot and can cause a burn. Do not touch.
p.
Never pick up or carry machine while the engine is running.
VI. Maintenance & Storage
a.
Never tamper with safety devices. Check their proper operation
regularly.
