b) Using the device as a work lamp
• Press the function key on the back of the device to switch on the work lamp, select the
light setting and switch off the lamp:
Press once
Main light half brightness (500 lm)
Press twice
Main light full brightness (1000 lm)
Press three times
Small light on top of lamp (150 lm)
Press four times
Switches the work lamp off
• When the battery is discharged, the work lamp switches off automatically to prevent the
battery from being damaged due to a deep discharge.
c) Using the device as a power bank
• Open the red cover on the back of the device and connect the device that you want to charge
or operate to the USB-A output (large connection socket).
• The connected device will be supplied with power.
• The capacity indicator will switch on so that you can monitor the charging status of the built-in
rechargeable battery.
• When the built-in battery is discharged, the power supply switches off automatically to
prevent the battery from being damaged due to a deep discharge.
The power bank function is independent of the work lamp function and can therefore
be used separately or in addition to the light function.
After use, close the red cover on the back of the device to ensure that the device is
protected against penetrating objects and water spray.
Care and cleaning
Disconnect the device from the power supply before each cleaning session. Do not
immerse the product in water.
Never use aggressive detergents, rubbing alcohol, organic solvents or other
chemical solutions, as these may damage the device or prevent it from functioning
properly.
• Wipe the work lamp with a dry or damp cloth and then wipe it dry.
Disposal
Electronic devices are recyclable waste and must not be disposed of in household
waste. At the end of its service life, dispose of the product in accordance with ap-
plicable regulatory guidelines.
The built-in rechargeable battery cannot can be removed and must be disposed of
together with the product.
Technical data
Protection rating ...................................IP44
Charging voltage ..................................5 V/DC
Charging current consumption .............1 A max.
Rechargeable battery ...........................Li-ion battery, 3.7 V/4000 mAh (type: 18650)
Charging time .......................................approx. 5-7 hrs
Output of power bank function ..............5 V DC/1 A
Operating time after full charge ............Approx. 2.5 hrs (main light full brightness)
Approx. 4.5 hrs (main light half brightness)
Approx. 6-8 hrs (small light)
Brightness .............................................1000 lm (main light full brightness)
500 lm (main light half brightness)
150 lm (small light on top)
Colour temperature ...............................6500 K
LEDs .....................................................10 W COB LED + 1.5 W SMD LED
Battery lifespan .....................................500 charging cycles
Weight ..................................................370 g
Dimensions ...........................................55 x 35 x 210 mm
USB-C cable .........................................Approx. 1 m
Operating conditions .............................-20 to +35 °C / 20-80 % relative humidity
Storage conditions ................................-20 to +45 °C / 20-80 % relative humidity
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
2443658_v1_1021_02_VTP_m_en
