•
Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Product Safety
• The product is approved only for operation in dry indoor rooms.
• The design of the product complies with the safety class II.
• The mains socket into which the mains plug is plugged must be easily accessible.
• Do not pull the power plug from the mains socket by pulling on the cable.
• Do not use the recessed light in rooms or under adverse ambient conditions where
combustible gases, vapours or dust are or may be present! There is a risk of
explosion!
• Do not fasten any items to the soldering station; never cover the soldering station;
there is a risk of fire!
• The soldering iron must not get damp or wet. If you want to use a damp sponge
for wiping the tip, it may only be inserted into the corresponding opening of the
soldering iron holder.
• Never use the soldering rod to heat up liquids.
• Never work on electrical components that are powered up. Always switch off the
power before-hand.
•
Caution!
Touching or soldering at condensers (or similar components) or leads/
cables connected to them, may result in a lethal electric shock! Condensers can
be under power for hours even after switching off the power supply!
• Keep your workstation clean.
•
Only work with sufficient lighting at your workstation.
•
Ensure proper ventilation during soldering. Solder or solder flux can be harmful.
• Wash your hands thoroughly after working with brazing solder containing tin. This
is especially true when using leaded solder.
• Do not put brazing solder into your mouth, do not eat or drink during soldering.
• Wear suitable protective clothing and protective glasses when soldering. Liquid
blazing solder, etc. may cause serious burns or harm your eyes!
•
Never use soldering flux, acid or similar aids when soldering. Such materials lead
to bad soldering joints and they can also damage the tip of the soldering rod.
Preferably, use a tubular solder with flux core.
• Do not touch any other area of the soldering rod than the handle when working.
Risk of burns!
• Soldering must be done on non-combustible surfaces. Protect other materials
nearby from damage through heat.
• Place the soldering iron in holder when not in use.
• If the power cord is damaged, do not touch it; there is danger to life from electric
shock! First, switch off the mains voltage to the socket to which the soldering iron
is connected (switch off at the corresponding circuit breaker or remove the safety
fuse or switch off at the corresponding RCD protective switch, so that the socket is
fully disconnected). Then you can remove the mains plug from the mains socket.
Do not use the product any longer, take it to a specialised workshop or dispose of
in an environmentally friendly manner.
• Never use the product immediately after taking it from a cold room to a warm
one. The condensation that forms might damage the product. Furthermore, this
could cause a lethal electric shock! Allow the product to reach room temperature,
before connecting it to the power supply and putting it into use. This may take
several hours.
• Disconnect the power supply from the power socket if the product will not be used
for a while (e.g. storage).
• The soldering station and iron must be completely cooled down before storing it!
There is a risk of fire, if this is not observed!
• In commercial institutions, the accident prevention regulations of the Employer’s
Liability Insurance Association for Electrical Systems and Operating Facilities are
to be observed.
• Never use a fuse with other nominal data. Never bridge the fuse! There is a risk
of fire!
Operating Instructions
ST-100D SE Digital Soldering Station
Item No. 2377689
Intended use
The digital soldering station is temperature-controlled with adjustable soldering tip temperature.
The adjustable temperature makes it possible to perform all soldering work in the electronic area
with various soft solders (lead, lead-free or silver solder). The soldering tip can be replaced.
The display shows the target and actual temperatures. Three programmable buttons can be
assigned custom temperature values.
The enclosed soldering handle is calibrated with this soldering station (temperature accuracy).
If the soldering handle has to be replaced, calibration must be repeated.
The soldering station is suitable only for operation with a mains voltage (230 V/AC, 50 Hz).
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners. All rights
reserved.
Delivery Content
• Wet cleaning sponge
• Soldering iron
• 4x Soldering tips
• Operating instructions
• Soldering station
• Power cable
• Soldering iron holder stand
• Dry cleaning sponge (metal)
Up-to-date operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
