◇
15
Chapter 4 Basic operation
4.1 Interface structure overview
The following figure is the interface structure:
Figure 4-1 Operation Steps
Interface Instructions:
The first line in the interface structure shows the initial states corresponding to the function
keys on the panel (specific interface parameters are described in details later). The TEST
interface cannot modify parameters.
The second line in the interface shows the parameter structures of the initial interface. For
example: STEP 01/01 in the SETUP interface means that it is the step 1 of the programme and
the total steps is 1; AC: means the AC withstanding voltage test interface; AC parameter means
that other parameters are AC withstanding voltage test parameters.
The third line in the interface is the function toggle interface. When some function lablels are
selected in the second interface, the corresponding functions can be changed and their relative
parameters will also vary. For instance, changing AC to DC, the tester will change from the AC
withstanding voltage test mode to the DC withstanding voltage test mode, and the current AC
parameter will be changed into DC parameter.
SETUP
SYSTEM
SAVE
OSC
STEP：01/01
FILE
AC Parameters
Insert Delete Save
AC（AC WV）
Test Parameters
IR
DC (DC WV)
TEST
Start Test
Communication Setup
Environment Parameter
LOAD
Summary of Contents for TH9110
Page 42: ...42 Take the External Power Supply as an Example...
Page 43: ...43...
