Tone TOUCH 01 Original Instructions Manual Download Page 26

Page: 26 / 28

Technical Data / Declaration

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE

WITH EC DIRECTIVE 2012/19/EU

This product must not be disposed of as urban waste at the end of its working

life. It must be taken to a special waste collection centre licensed by local

authorities or to a dealer providing this service. Separate disposal of the product will

avoid possible negative consequences for the environment and for health

resulting from inappropriate disposal, and will enable the constituent materials

to be recovered, with significant savings in energy and resources.

EEC CONFORMITY DECLARATION ACT 2006/42/EC

The undersigned: TONE Kaffeemaschinen AG

With premises at: Rheinweg 4, 8200 Schaffhausen, Switzerland

Declares that:

The coffee machine has been projected and manufactured in conformity with

Directive 2006/42/EC and relevant national law, in accordance with the following norm for conformity evaluation:

UNI 9887, ISPSEL rev. 95.

TECHNICAL DATA

Type

TOUCH 01

Dimensions in mm (w x h x d)

245 x 597 x 520

Weight

18,5 kg

Power

~ 220 - 240V | 50/60Hz

Boilervolume

6 liters

Minimal Waterpressure

0,138 MPa

Maximal Waterpressure

0,620 MPa

Heating

2800W

Noise level

< 70 dB

get in TOUCH:

TONE Kaffeemaschinen AG

Rheinweg 4

8200 Schaffhausen

Switzerland

+41 52 620 06 06

[email protected]

www.tone-swiss.com

Technical Data / Declaration

Summary of Contents for TOUCH 01





























Search results

Summary of Contents for TOUCH 01

Reviews:

Related manuals for TOUCH 01

Brands by name

Popular brands

Tone TOUCH 01, Original Instructions Manual

Search results

Summary of Contents for TOUCH 01

Reviews:

Related manuals for TOUCH 01

Brands by name

Popular brands