11
PROGRAMMING – Main Brew Head
To enter programming mode, press the upper left corner
(indicated with dashed lines) of the ‘beverage selection’ screen
and hold for 3-4 seconds. A beep will sound if beeper is enabled.
Release the touch screen. Many of the steps outlined below are
applicable to programming of the side brew arm spray heads.
Applicable sections below are the calibration and recipe sections.
Other settings are controlled by the main brew head settings.
A ‘User Password’ screen with keypad will be displayed. Type in
the 4 digit user password (3650). The entered number will display
in the blank area in the upper right side of the screen as you type
it. Press enter. CLR will clear entry without exiting the screen.
Pressing cancel will exit the screen.
It is not possible to save the user password.
The following screen displays if the incorrect value is entered.
Push the large button on the display and you will be returned to
the user password screen to try again.
Enter the correct password.
