Page 3 of 39
Use with barrel and external gas supply
1.4 Requirements for the beverages
The
TONE Nitro
was primarily developed for use with Cold Brew Coffee. However, it can also be
used with other beverages such as tea.
It is essential to ensure that the liquids are filtered to a filtration degree of at least 10 µm (cf. common
disposable filters made of filter paper), as otherwise the pump inside the machine or the aerators
can clog and damage the unit. Furthermore, it is essential that the unit is cleaned with fresh drinks
after use. Only when used with pasteurised drinks do different cleaning intervals apply. Refer to
"CLEANING SCHEDULE " for information on cleaning related issues.
1.5 Technical Data
Output capacity continuous
40 l / h
Output capacity continuous
at 17°C
7°C
25 l / h
Output capacity continuous
at 22°C
7°C
15 l / h
Built-in compressor
YES
Minimum cooling capacity
4 °C
Liquid Tap temperature
5°-8°C (+/- 2°C)
Required cooling time
2
– 4 min.
Supply voltage
230 V / 50 Hz
Cooling liquid
R
– 134a (68g)
Power
Max. 300 W
Weight
23,5 kg
Measurements
Width: 26 cm
Depth: 32 cm + 12,5 cm
(=tap unit)
Height: 35 cm
1.6 EC - Declaration of conformity
This device is EC-compliant according to the following EC directives:
EU EMC Directive new 2014/30/EU
NSP Directive new 2014/35/EU
1.7 FDA - Declaration of conformity
All parts in contact with the medium/liquid and all sealants used in the
TONE Nitro
meet
the requirements of the FDA (Food and Drug Administration) and/or are made of stainless steel.
