TONE Factory | Manual EN
3. Starting the motor
The following steps will show you how to easily turn on the
turntable motor.
• Remove the platter and cardboard insert that protects the
turntable’s main bearing from shipping damage.
• The drive belt has already been attached to the sub-plat-
ter. After removing the paper insert, place it on the motor
pulley. Then put the platter with the felt mat back on the
sub-platter.
1. Turntable Placement
The turntable should always be placed on a flat surface if
possible. Proper placement will ensure proper arm function.
We recommend checking with a spirit level.
2. Connecting the turntable to the mains
Prepare the turntable‘s power supply and connect it to the rear
terminal.
IMPORTANT NOTE:
First connect the power supply connector to the turntable,
then connect the turntable to the mains.
Connecting the power supply to the mains before connecting
it to the turntable can damage the electronics.
Power Input
Drive Belt on the Motor Pulley
Carton Insert
