TONE Factory | Manual EN
5. Cable Connection
For the cable output used, connect the RCA cable according
to the following instructions to the rear terminal of the turnta-
ble. Left channel - left (white) connector in the terminal. Right
channel - right (red) connector in the terminal.
6. Dustcover Installation
The following steps will show you how to easily install the
dustcover on your Tone turntable. To mount the cover, it is
necessary to prepare the following parts, which can be found
in the hinge box.
• Set of hinges (2pcs)
• Set of screws (4pcs, 2 for each hinge)
• Tightening tool
• Dustcover
• Damping pads
• Use the rocker switch to select the playback speed. The
left position is for 33 rpm. The right position is for 45 rpm.
The middle position of the switch stops the motor.
4. Bluetooth Connection
Use the rocker switch located in the left front corner of the
turntable to turn on the Bluetooth output. The LED will start
flashing and the turntable will try to connect to the nearest
device automatically. The LED indicator flashes with a two-se
-
cond pause as it tries to connect to the device. Once connec-
ted, it flashes once every 10 seconds.
Bluetooth OFF
Bluetooth ON
LED Indicator
Bluetooth
Speed Change
Left Channel Right Channel
