TONE Factory | Manual EN
1. Remove the cover from the package and remove the pro-
tective foil from both sides.
2. Screw in both hinges to the back of the turntable.
3. Insert the damping pads on the front edge of the cover.
4. Carefully slide the cover into the hinges.
7. Technical Data
Turntable Specs
Nominal speeds: 33/45 r.p.m. (electronic change)
Speed variance: 33: ±0.75 % 45: ±0.65 %
Wow and flutter: 33: ±0.22 % 45: ±0.17 %
Signal to noise: -68dB
Effective tonearm mass: 6g
Effective tonearm length: 8.6“ (218.5mm)
Tracking force: 17.5mN pre-adjusted
Overhang: 18mm
Power consumption: 3W/ 0.3W standby mode
Output: RCA Line, Bluetooth
Outboard power supply: 15V/0.8 A DC, 110 – 240V/50 –
60Hz, universal power supply
Dimensions (W x D x H): 360 x 360 x 54mm,
with dustcover 360 x 360 x 85mm
Weight: 2.8 kg / 3.5kg with dustcover
Bluetooth
Maximum transmit power per operated frequency band:
Class II, 2.5mW (4dBm) per 2.4GHz – 2.48 GHz
Technical specifications built in MM phono pre-amplifier
Gain: 37dB
Output voltage typically: 300mV/1kHz at 4mV/1kHz input
Input impedance: 47kohms/100pF
Noise floor: >68dB
RIAA-equalisation curve accuracy: 20Hz-20kHz / max. 0,5dB
Power consumption: 2W
8. Potential incorrect use & fault conditions
Tone turntables are manufactured to the highest standards
and undergo strict quality controls before leaving the facto-
ry. Faults that may possibly occur are not necessarily due to
material or production faults but can sometimes be caused
by incorrect use or unfortunate circumstances. Therefore the
following list of common fault symptoms is included.
The platter doesn‘t turn although the unit is switched on:
• The unit is not connected to the mains power supply.
• No mains at the socket.
•
Drive belt is not fitted or has slipped off.
No signal through one or other channel or both channels:
• Bluetooth speaker / Headphones not switched on / out of
battery.
•
Amplifier not switched on.
•
Amplifier or speakers defective or muted.
• No connection to the loudspeakers.
Distorted/inconsistent sound from one or both channels:
•
Record player is connected to wrong input of amplifier, or
MM/MC switch incorrectly set.
Hinge
Damping-Pad
Hinge
Screw
Tool
