Tone Commander 6220T-TSG User Manual
45
Speed Dial Programming
From the User Options menu, select SPDIAL.
(
Setup
→
USER
→
SPDIAL)
The current state of each multifunction key is shown by the its
status indicator.
Green
– unused key, available for speed dial use.
Red
– Speed Dial key that has already been
programmed.
Off
– key set up for a call appearance, feature
activator, or DSS.
Press a lit key to program it for speed dialing.
The selected key’s indicator will alternately flash red and
green.
The currently programmed dial string, if any, will be shown in
the display.
Enter digits (24 maximum) with the dial pad.
When all digits have been entered, press the
Done
key to
return to key selection or the
Setup
key to exit Setup Mode.
If you need to make corrections while entering numbers,
select
Å
BKSP
(backspace) to delete the previous digit.
CLEAR
removes all digits, allowing you to start over. A Speed
Dial key will revert to 'Unused' if saved with a cleared dial
string.
“Smart” Pauses
The first pause in a dial string will delay dialing until the call is
answered; additional pauses delay dialing for one second. Enter
multiple pauses to increase the delay time. Pauses are entered with the
PAUSE softkey, and are shown in the display as a
P
character.
DIAL#=5553491000
|BKSP CLEAR PAUSE
Done
