manualshive.com logo in svg

Tone Commander 6220T-TSG, User Manual

Share
Download
Tone Commander 6220T-TSG User Manual Download Page 23

20

Tone Commander 6220T-TSG User Manual

Parameter Download 

(National ISDN only)

Parameter Download is a network feature that Identifies Call
Appearance and Feature Activator keys that are assigned to your line
so that your phone may be configured automatically.

Note

: Speed Dial and DSS keys are not configured by Parameter

Download, as well as other features listed on page 21
(Customize your Phone).

If Parameter Download is not supported, the following screen may
appear momentarily, prompting you to manually configure the
telephone at a later time (see page 23).

Automatic Button Detection 

(5ESS Custom ISDN only)

Lift the handset. Press each multifunction key; the phone will discover
the key's network assignment. Keys that have no network assignment
may be used for speed dialing – please refer to page 30.

Using Local Inspect to Verify Keys

Local Inspect allows you to identify the call appearance or feature
assignment of each configured key, directory number bearer
capabilities, and the feature indicator assignment for the Message
Indicator. Please refer to page 36.

NO PARAMETER DOWNLOAD
PRESS SETUP TO CONFIGURE

Summary of Contents for 6220T-TSG











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands