2-2-2
Attach the water feed hose
2-2-3
Attach the stud bolts
Install the stud bolt M10*P1.25 35mm (⑥-6)
onto the exhaust flange of the turbine (x5)
and the turbo bracket (x1).
Install the stud bolt M10*P1.25 40mm (⑥-7)
onto the inlet flange of the turbine (x4).
Install the stud bolt M8*P1.25 45mm (⑥-8)
onto the compressor inlet flange (x2).
WATER FEED HOSE
・WASHER M14（③-2、×2）
・BANJO FITTING M14 4AN（③-3）
・WATER BOLT（③-1）
・MESH HOSE 300mm（③-4）
・FITTING11mm- 4AN（③-5）
※ SHORT END TO TURBO
※ Install using the 'double nut' method.
(nuts included)
※ Ensure the stud bolt does not move
when removing the nuts.
STUD BOLT
ORIENTATION
SHORT
LONG
30
