Premier C Series Dispensers Site Preparation Manual
Tokheim Corporation
Form 5869 Version 1.0 July 1999
READ ME FIRST
Equipment Inspection
When the dispensers arrive at the installation site, the unpacked units should
be inspected for possible shipping damage. If damage is evident, it must be
reported to the carrier. Shipping damage is not covered under the Tokheim
warranty policy.
After unpacking and prior to installation, the delivered equipment should be
inspected to insure that all the required materials are on hand, and the
dispensers have all the ordered options and markings. Compare the model
number on the dispenser model/serial plate to the model number notation
information in section 1 of this manual. If discrepancies in dispenser options
and markings are determined, contact Tokheim World Wide Order Support at
219-470-4640.
Start-up Checklists
Proper installation of today's sophisticated electronic dispensing systems is
essential to ensure trouble-free performance. Therefore, Tokheim has
established inspection and checkout procedures to be followed to verify
proper equipment installation.
A properly completed checkout form (Form 4861) must be submitted by an
authorized Tokheim distributor to begin the equipment warranty. A Tokheim
certified technician must perform the checkout/start-up. Checkout forms
must be submitted within 15 days after checkout and start-up completion in
order to be paid. For more information on Tokheim's checkout and start-up
policy, see Form 5004, "Warranty Registration and Checkout Procedures for
Tokheim Equipment."
Checkout forms can
be ordered at no
charge through:
Tokheim Service Parts
PO Box 663
Fremont, IN 46737
Phone (219) 470-4710
Fax 1-800-866-1999
