40
Use key to select the digit, and press MEM key to confirm and proceed to the
next.
(Press MD to proceed without saving. Press C key to return to RUN measuring mode).
●
Data Clear Check
Press MEM key to save the number and proceed to the next.
Press C key to return to tightening mode setting.
* If you change the number of spindles, tightening data will be deleted. Output the
Necessary data to PC or printer in advance.
（
Data Clear display
）
●
NG setting (Default: NG_RES)
Select from two options (NG_RES / AL_RES) in case the judgment for tightening
torque/angle is NG.
NG_RES : When the judgment is NG, press MEM to save the tightening data, and proceed to
the next tightening (If you press Clear key, the tightening data will be deleted and
it will be set for the same spindle tightening).
AL_RES : When the judgment is NG, press MEM to save all the tightening data of the work
and re-start from the beginning stage.
Use key to select NG setting and press MEM key to confirm and proceed to the next.
(Press MD to proceed without saving. Press C key to return to RUN measuring mode).
The remaining settings (tightening direction, thereafter) is the same as the instructions for
single-spindle tightening. Please refer to P30 -.
