3.1
Assembling Tobii Pro Mobile Device Stand
To assemble the stand (configuration A2):
1. Make sure you have all the pieces required to assemble the stand. Remove all the pieces from the travel case before you
start to assemble it.
2. Slide the main body onto the table top as shown in the picture.
Make sure it slides on as far as possible so that the stand sits
tightly.
3. Firmly tighten the clamp screws underneath the table top.
4. Slide the long scene camera rod into place for setup A2. There are
two scene camera rods available: one longer that positions the
scene camera farther away (for setups A/B/C/D-2) and one short-
er that positions the scene camera closer to the tested device (for
setups A/B/C/D–1).
6
Tobii Pro Mobile Device Stand User’s manual v.1.0.8 - en-US
Summary of Contents for Mobile Device Stand
Page 1: ...Tobii Pro Mobile Device Stand User s Manual...
Page 4: ......
