4
3-phase units)
Damage to electrical components resulting from use of an incorrect power supply
cord or circuit breaker
•Operational problems resulting from customer's failure to follow established procedures
outlined in the Owner's Manual.
•A service call if nothing wrong is found (parts still work per spec when tested).
•Recalibration of temperature and humidity controls (all controls are carefully calibrated
and tested at our facility before shipment).
•Any equipment moved from the place of original installation unless TOASTMASTER®
agrees in writing to continue the warranty after the relocation.
•Ongoing operational adjustments due to changing environmental conditions or normal
wear and tear.
•Any overtime charges. TOASTMASTER® will pay straight time only for any work
performed on TOASTMASTER® equipment.
Food service equipment and parts must be installed and maintained in accordance with
TOASTMASTER® instructions. Users are responsible for the suitability of the units or parts to
their application. There is no warranty against damage resulting from accident, abuse, alteration,
misapplication, inadequate storage prior to installation, or improper specification or other
operating conditions beyond our control. Claims against carrier's damage in transit must be filed
by the buyer and, therefore, the buyer must inspect the product immediately upon receipt.
THIS WARRANTY DOES NOT COVER ADJUSTMENTS
DUE TO NORMAL ON-GOING USE!!!
PARTS RETURN PROCEDURES AND CONDITIONS:
The following procedure shall be followed for the return of parts to the factory for credit
consideration:
•All parts received by TOASTMASTER® must have a completed Return Authorization
Form as supplied by TOASTMASTER® with the part. Complete and return this
Authorization Form
with the defective part(s)
.
•Parts MUST be packed securely so that in-transit damage cannot occur.
• Prepay shipment. Any parts returned collect will be refused by our Receiving Department.
Credit will be issued on proper returns only.
•As soon as parts are tested and confirmed as defective, credit will be issued against them.
•If the engineering test shows the component is not defective and in good working
condition, it may be returned to you along with your request for payment.
